欢迎进入沈阳行晋科技有限公司网站!
024-88338111
网站西藏快3
公司简介
产品展示
产品领域
成功案例
资质荣誉
公司动态
人才招聘
在线留言
联系我们
联系我们
  • 地址 : 沈阳市大东区上园路43甲号7门
  • 邮编 :100006
  • 电话 : 024-88338111
  • 传真 : 024-88334111
  • 热线电话 : 024-88338111

产品展示

  • JET.L 2018-09-26西藏快3

    JET.L
    JET.L is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as:
    Tenoning / Finger Jointing / Drilling
    Mortising / Milling / 4/5 axis profiling
  • JET 2018-09-26

    JET
    JET is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as:
    Tenoning / Finger Jointing / Drilling
    Mortising / Milling / 4/5 axes profiling.
  • JET.LINER 2018-09-26

    JET.LINER
    JET.LINER is a machining center with 5 interpolated axes ideal for machining elements for doors and frames and straight elements with a section up to 250x100mm. 
  • CSF2 2018-09-25西藏快3

    CSF2
    DOUBLE.CSF2, double machining center with 5+5 interpolated axes, numerically controlled, is designed for:
    Tenoning / Finger Jointing
    Boring / Mortising
    Milling
    4/5 axes profiling
    Both at the ends of the elements and between the ends themselves.
  • JET 2018-09-25西藏快3

    JET
    DOUBLE.JET is a double machining center with 6+6 interpolated and numerically controlled axes, equipped with an automatic loading/unloading system.
  • EVOLUTION 2018-09-25

    EVOLUTION
    EVOLUTION is a double machining center equipped with two independent operating units with 5+5 interpolated axes, to perform machining on the same piece with both heads or two different pieces at the same time.
  • EVO. JET 2018-09-25

    EVO. JET
    EVOLUTION.JET is a highly flexible machining center both in terms of sizes customization and in terms of the number of working tables that can be fitted with equipment for manual, semi-automatic or fully automatic loading and unloading.
  • EVOJET.LINER 2018-09-25

    EVOJET.LINER
    The EVOJET.LINER double head, numerically controlled machining center, equipped with two independent working tables, 4 or more reinforced clamps per table and an automated loading/unloading system, is extremely well-suited to the production of elements for doors in batch 1, also thanks to the PITAGORA  parametric programming software, the automatic reading of blank size, to sawing unit and to the fast positioning of the motorized clamps.
西藏快三 西藏快3技巧 西藏快3平台 西藏快三 西藏快3技巧 西藏快3平台 西藏快三 西藏快3技巧 西藏快3平台 幸福彩票网 幸福彩票幸运相伴 -团队计划 幸福彩票网-西藏快3 幸福彩票官网 -免费计划 幸福彩票网 幸福彩票网-西藏快3